Jiangshan Huaxing Machinery factory tell you what is the elevator rope head

As the name suggests, the elevator rope head is the end of the elevator connecting the motor and the slide rail, which plays an inseparable role in the normal use of the elevator. People usually pay attention to the high-end of the elevator, which plays an integral role in the normal use of the elevator. People usually focus on the high-end equipment and components in the elevator, but few people will pay attention to the importance of the elevator rope head. In fact, the rope head is also one of the most critical and complex components in the use of elevators. The role of the elevator rope head is very obvious, and it will directly affect the operating efficiency, stability and safety of the elevator. In order to solve this problem, the market has introduced various types of rope head combinations to better meet the needs of different elevators. According to its structural characteristics and uses, we can divide the elevator rope head into the following types

A, type A rope head

The rope head combination is widely used in some small elevators, and its structural characteristics are generally composed of copper rope head rod and telescopic hook. The structure is relatively simple and suitable for installation and maintenance. In addition, the telescopic hook of the A rope head can automatically adjust the length of the hook body, and then always remain horizontal when moving up and down to avoid vibration. However, the rope head is mainly used for light load elevators and is not suitable for light load elevators or high-rise elevators.

Two, B type rope head

The structure of type B rope head combination is slightly more complex than that of type A. It consists of copper rope rod and nylon. In use, nylon fully demonstrates its buffering and noise reduction characteristics. In addition, the B-type rope head combination can also automatically identify the up and down state of the elevator, so that the elevator is always in a stable state during the take-off and landing process. However, the Type B rope head is still suitable for small elevators and light load elevators. If you want to apply it to a light load elevator, you need to consider its carrying capacity.

Three, C-type rope head

C-type rope head combination is suitable for high-rise elevator and light elevator, composed of steel rope rod and steel telescopic hook, good bearing capacity, strong durability. The steel structure of the C-type rope head makes it stronger and can adapt to more elevator types, while considering safety and stability, and high engineering quality.